396-9901: General duty Straight Control Tie Rod

Browse:

Length (in): 9.55 Height (in): 4.32 Tube Diameter (in): 1.34 Approx. Weight (lb): 10.6

Product Parameters

Browse:

Length (in): 9.55
Height (in): 4.32
Tube Diameter (in): 1.34
Approx. Weight (lb): 10.6

Product Details

A Straight Sleeve Bearing is a sliding contact bearing in which the surface of the shaft slides over the surface of the bush. It consists of a cylindrical sleeve with a smooth inner surface that allows a shaft to rotate inside it with minimal friction. The angle of contact of the bearing with the journal is 3600, therefore, it is a full journal bearing. With the addition of lubrication, sleeve bearings offer a low coefficient of friction and provide excellent wear resistance.

Attributes:
• Designed to minimize friction between the shaft and the bearing surface
• Can accommodate misalignment between the shaft and the bearing surface
• Surface hardness is HRB 70 (minimum) and density lies in the range of 6-6.5 g/cm3
• Possesses high shock load resistance, minimize vibration (and therefore noise)

Applications:
A Straight Sleeve Bearing is suitable for applications where press fitting into a housing bore is the most practical bearing retention method. These are used in crankshaft bearings in petrol and diesel engines, centrifugal pumps and large size electric motors.

Previous: 397-1970: Rod Next: 396-0368: 15:1 Compression Ratio Steel Piston Body